|
|
YAMADA 3" NDP-80 Series Pneumatic ALUMINUM-Combination fluid port:ANSI Flange with 3" tapped FNPT(ADC12) Ball Valve Diaphram Pump 0-214 GPM
SKU
NDP-80BAC
Port Dimensions
Intake & Discharge Connection
Polypropylene (PPG): 3" ANSI Flange B16.5 #150
Aluminum (ADC-12): 3" ANSI Flange B16.5 #150 (with tapped 3" Female NPT)
Stainless Steel (316): 3" ANSI Flange B16.5 #150 or 3" Female NPT
Hastelloy C: 3" ANSI Flange B16.5 #150 or
3" Female NPT
Cast Iron: 3" Female NPT
Air Inlet
3/4" Female NPT (includes ball valve)
Air Exhaust
1" Female NPT (includes silencer)
Maximum Liquid Temperature*
Diaphragm Material / Temperature
Neoprene: 180°F (82°C)
Buna N: 180°F (82°C)
EPDM: 212°F (100°C)
Hytrel: 248°F (120°C)
Santoprene: 212°F (100°C)
Viton: 248°F (120°C)
Teflon: (PTFE) 212°F (100°C)
*Polypropylene pumps have a maximum liquid temperature of 180°F (82°C) regardless of diaphragm material.
Air Supply Pressure (All Models)
20 to 100 PSI (1.4 to 7 kfg/cm)
Discharge Volume Per Cycle
Rubber diaphragm: 2.25 gallons (8.5 liters)
PTFE diaphragm: 1.0 gallons (3.8 liters)
Maximum Cycles Per Minute
Rubber diaphragm: 95
PTFE diaphragm: 160
Maximum Size Solid
13/32" (10 mm)
Maximum Dry Suction Lift
Rubber-fitted pump capability: 19-feet
Air Motor
Standard: Aluminum
Optional: Epoxy-coated, Teflon-coated, or Electroless Nickel Plate
Notes: Hytrel-fitted pumps include Buna N check balls & wetted o-rings. Santoprene-fitted pumps include EPDM check balls & wetted o-rings.
|