Widder Power Hacksaws and Blades


Widder Power Hacksaws

Power Hacksaws & Accessories with the Widder trademark of quality, and made by High Precision Incorporated, is your assurance of the finest, ruggedly designed saw units for cutting all types of pipe, tubing and structural shapes.

  • Rigid clamping system mounts saw directly on workplace.
  • Straight cuts are possible in any position, even under adverse conditions.
  • Blade speeds from 0-300 stroke per minute allow safe and efficient operation in all types of material.
  • Handles pipe up to 30" in diameter in a single clamping; larger cuts with multiple clamping.
(left) Model 10267
The Widder Pneumatic Hacksaw is suitable for all types of field and in-plant service. This heavy duty explosion proof unit is driven by a 1.7 hp vane type air motor. Its self contained throttle allows blade speed control from 0 to 300 strokes per minute. 40cfm (1.28m3) of 90 psi (620 kpa) air with an airline filter-lubricator is recommended.
(Center) Model 18800
The Widder Hydraulic Hacksaw offers an alternative for those jobs where exhaust air and an electrical drive are not allowed. This explosion proof unit requires 5 gpm (18.9 lpm) 1500 psi (105 Kg/cm2) hydraulic fluid of at least 100 SUS viscosity. The built-in flow control valve regulates the blade speed from 0 to 300 strokes per minute.
(Right) Model 10272
The Widder Electric Hacksaw operates on 120 volt, 15 ampere household current. A built-in heavy duty speed control regulates the blade speed from 50 to 250 strokes per minute. This is an ideal tool for in-plant service.
                                                         
MOUNTING ACCESSORIES

Widder Power Hacksaws are designed to be mounted on the work to be cut with one of the following accessories.

  • The LARGE PIPE CLAMP (#20257) is used to mount your power hacksaw on pipe and tubing from 4" to 12" diameter. It features a quick locking clamp. EXTENSION CHAINS are available in 6" (#20258) and in 12" (#20259) diameter increments to increase the capacity of this clamp in order to meet your needs.
  • The SMALL PIPE CLAMP (#20252) is used to mount your power hacksaw on pipe and tubing up to 6" diameter. It features a quick-locking clamp and a swivel head for angle cuts.
 
BLADE GUIDE ACCESSORIES
Blade Guides reach across the work being cut and stabilize the blade so that it does not whip and vibrate. This extends the blade life, squares the cut and helps eliminate accidental blade breakage.
   
WIDDER POWER HACKSAW BLADES
Widder HSS Power Hacksaw Blades are made of high speed tool-steel and are raker set to provide an excellent compromise between cutting speed and blade life.

Cutting Speeds for Widder HSS Power Hacksaw Blades
MATERIAL STROKES PER MINUTE
Carbon Steel 160
Structural Steel & Pipe 180
Ductile Iron 120
Alloy Steel 120
Stainless Steel 80
Aluminum 160
Brass 120

WIDDER HIGH SPEED STEEL POWER HACKSAW BLADES
PART LENGTH TPI MIN. WALL
THICKNESS
22290 8" 8 3/16"
22210 8" 16 3/32"
22211 8" 24 1/16"
22271 10" 4 3/8"
22231 12" 12 1/8"
22260 12" 16 3/32"
22229 16" 8 3/16"
22270 16" 16 3/32"
22272 20" 14 1/8"
22240 21" 5 5/16"
22230 21 13/16" 12 1/8"
22273 24" 14 1/8"
22275 30" 12 1/8"
22237 37" 12 1/8"
   
SPECIAL ACCESSORIES & MODIFICATIONS

 

 
 
0 items found
Sort By: